Z-P Series Gas Pressure Regulator Connection PS 50 bar
Z Series is a pilot-controlled pressure regulator for medium and high-pressure applications.
About Product
It is suitable for system installation especially for natural gas distribution as well as distribution networks for commercial and industrial use. The accuracy of the reduced pressure, high capacity variation rate, rapid adaptation to changes in operating conditions, together with sudden changes in flow rate, make the Z series regulators particularly suitable for use in gas supply systems. F Series regulators are in the class that meets EN 334: 2019 European standard. In the operation of these regulators, Z series regulators have a full maintenance design without removing from the mainline.
Z series Pilot Operated Gas Pressure Regulator Connection, Combined with Safety Shut Off Valve, are produced in accordance with 2014/68 / EU directives and EN 334: 2019 and EN 14382: 2019 standards
Technical Specifications
| Technical Specifications | |||
| Desing Pressure, PS | 50 bar | 5000 kPa | 725 PSIG |
| Inlet Pressure Range, bPu | 1 – 50 bar | 100 – 5000 kPa | 14.5 – 725 PSIG |
| Type | IS | ||
| Fail Mode | Fail to Close on request Fail toOpen | ||
| Outlet Pressure Range Wd | 1 - 16 bar | 100 – 1600 kPa | 14.5 – 232 PSIG |
| Operating Temparature AmbienteTemperature | -20°C to +60°C / -4°F to 140 °F on req. -40°C / 40 °F -30°C to +60°C /-22°F to 140 °F | ||
| Accuracy& lock-uppressure(AC-SG) | up to AC2.5/ up to SG5 | ||
| Lock-up Zone | Qmin, Pu / Qmax, Pu = 2,5 / 100 | ||
| Type of Fluid | Natural gas, Town gas, Propane, Butane, Air, Nitrogen or any non corrosive and filtered dry gases. Group1,2,3 | ||
| Diameter | DN25-DN40-DN50-DN80-DN100 Class 150-300-600 RF , according to ANSI B16.5 and PN 16/40 according to DIN 2263, (ISO 7005) | ||
| Safety Devices | Over Pressure Shutoff and Under Pressure Shutoff. | ||
| Options | Monitor Regulator, Silencer, Electronic or Pneumatic Remote Control, Flow Limiter, Pilot Heater, Position Transmitter |
Photo Gallery
