[email protected]
  1. Home
  2. Products
  3. Turbine Meter

Turbine Meter

Gas Turbine Flow Meters

Radial Gas Turbine Flow Meters are developed and produced according to Quality Standard ISO 9001:2008. These Turbine meters are with International type approvals MID TCM 143/13-5110 and Type Examination Certificate FTZÚ 15 ATEX 0172X for safety approvals and marking of equipment Ex II -/2G IIB T4. Radial High Pressure flow meters are suitable for applications where the flow rate is very much constant and have critical applications where stoppage of Natural Gas or LPG may lead to process failure or huge production losses.

Ask for Price

About Product

Basic Features:

  • Principle of velocity measurement
  • For measurements requiring obligatory verification (for MID versions)
  • Accuracy:
    - from 0.2 Qmax to Qmax ... +/-1 %
    - below 0.2 Qmax ... +/- 2 %
  • Sizes G 16 up to G 400 (for billing G 65 - G 400)
  • Dimensions DN 50, 80 and 100
  • Operating pressure max. 6 bar
  • Meter element can be calibrated without monopipe fitting
  • Counting device is in a gas-free space
  • Low starting value
  • High measurement stability and operational security due to high-quality, wear-resistant components
  • Self-lubricating ball bearings
  • Pressure extraction connection inside the meter
  • Designed for simple servicing (measurement-cartridge principle)
  • LF-pulse generator (standard)
  • Standard integrated flow strainer
  • Short straight inlet lengths (2 × DN)
  • Operation temperature range:
    - gas temperature -10°C up to +55°C
    - ambient temperature -10°C up to +55°C

Mounting and maintenance

  • Mounting /dismounting of the meter element possible without disconnecting the monopipe fitting
  • The monopipe fitting remaining in the pipe network enables mounting /dismounting of the meter element without tension from the pipe network
  • Can be installed in any position from horizontal to vertical (turbine axis not suspended and roller counter axis always horizontal)

Options

  • Over-run brake: Mechanical over-run brake without measuring range for intermitting operation
  • Pulse generator:
    - 2nd LF-IPG, 1x can be retrofitted without breaking the verification seal
    - MF-IPG
  • Temperature sensor pockets in monopipe fitting

Photo Gallery

Contact Us