Solenoid Valve Manual
Hand-wound Solenoid valves, gas leak detectors, fire control systems etc. It closes the gas in line with the signals from the systems. It has been designed and produced in accordance with 2014/68 / EU directives.
About Product
Hand-wound Solenoid valves, gas leak detectors, fire control systems etc. It closes the gas in line with the signals from the systems. It has been designed and produced in accordance with 2014/68 / EU directives.
SV Series Manual Solenoid Valves are designed to shut off the gas flow in line with signals from a gas leak alarm system, fire detection system or any source that generates an electrical signal. It is mounted on the gas pipe and connected with the alarm system. It can be used in open and closed areas to the atmosphere. When the electrical signal is received, the gas flow is turned off, to allow the gas flow again, the crown must be raised. It has been designed and produced in accordance with 2014/68 / EU directives.
Technical Specifications
| Technical Specifications | ||
| SV | SV / 6b | |
| Maximum permissiblepressure(PS) | 500mbar | 6 bar |
| Nominal Size | Threaded Conn. 1/2'' - 3/4'' - 1'' - 11/4'' - 11/2'' - 2'' Flanged Conn. DN 25-32-40-50-65-80-125-150-200-250-300 | |
| Connections | Threaded series connections: UNI-ISO 7/1 Flanged series connections: ISO 7005 or ANSI Class 150 RF | |
| Temparature Range | Operatingand ambient temperature -15°C to +60 °C On request -40 °C | |
| Materials | Aluminum valve'sbody and cover; stainlesssteel springs and control piston; NBR rubber gasket and O-ring; other part are of brass, aluminum and galvanized steel. | |
| Working Voltage | 12 Vdc, 12 V / 50 Hz, 24 Vdc, 24 V / 50 Hz, 110 V / 50-60 Hz, 230 V / 50-60 Hz | |
| Power supply voltage tolerance | -15% ... +10% | |
| Protection degree | IP65 | |
| Group | 2 | |
| Optional Explosion Proof Coil | Class «F» coil according to the VDE 0580 regulations. Protection ExII 2G (Eexd IIC T5).Wire insulation Class H (200°C) Electrical insulation IP 67, Certificate of the coil CESI 03 ATEX 212. | |
| Closing time: | < 1 s | |
| Power Consumption | Threaded11 W, DN65 - DN300 28 W | |
| CE-mark acc. to PED and PIN-Nr. | CE1783 PED-079 | |
| Explosion protection | Mechanical components of regulator do not contain a potential ignition source, thus do not fall in limits of ATEX 95 (94/9/EG). (Used electronic accessories comply with ATEX-demands.) | |
Photo Gallery
