R Series Gas Regulator Pmax 16 bar
“R” series, diaphragm-controlled, spring-loaded regulators; Suitable for low and medium pressures. "R" series regulators are equipped with internal sensing lines and can be produced with external sensing according to customer request. A special regulator design combined with a diaphragm mechanism gives us.
About Product
“R” series, diaphragm-controlled, spring-loaded regulators; Suitable for low and medium pressures. "R" series regulators are equipped with internal sensing lines and can be produced with external sensing according to customer request. A special regulator design combined with a diaphragm mechanism gives us;
- High flow rate permeability
- High precision even at maximum flow
- 0 leakage even when there is no flow
- Accelerated reflexes
- Provides the results of maintenance and repair without disconnecting from the pipeline
Direct drive Gas Pressure Regulators can be in the Same Body with Safety Close Valve, manufactured in accordance with 2014/68 / EU directives and EN 334: 2019 / EN 14382: 2019 standards.
Technical Specifications
| Technical Specifications | |||
| Design Pressure, PS | 25 bar | 2500 kPa | 362.5 PSIG |
| Inlet Pressure Range, bPu | 0.2 – 25 bar | 20 – 2500 kPa | 2.9 – 362.5 PSIG |
| Type | DS on request IS | ||
| Fail Mode | Fail to Open | ||
| BP Model | 10 - 85 mbar | 1 – 8.5 kPa | 0.14 – 1.23 PSIG |
| Outlet Pressure Range Wd MP Model | 80 - 350 mbar | 8 – 35 kPa | 1.16 – 5.07 PSIG |
| AP Model | 300 - 5000 mbar | 30 – 500 kPa | 4.35 – 72.5 PSIG |
| Operating Temperature Ambient Temperature | -20°C to +60°C / -4°F to 140 °F on req. -40°C / 40 °F -30°C to +60°C /-22°F to 140 °F | ||
| Accuracy& lock-up pressure(AC-SG) | up to AC5 / up to SG10 BP Model AC5, SG20 – MP-AP Model AC5, SG10 | ||
| Lock-up Zone | Qmin, Pu / Qmax, Pu = 2,5 / 100 | ||
| Type of Fluid | Natural gas, Town gas, Propane, Butane, Air, Nitrogen or any non corrosive and filtered dry gases. Group1,2,3 | ||
| Diameter | DN25 - DN40 - DN50 PN 16/25 according to ISO 7005-1, ISO 7005-2; class ANSI 150RF according to ANSI B16.5, ASME B16.42 and class ANSI 125 FF according to ASME B16.1 - | ||
| Safety Devices | Over Pressure Shutoff and Under Pressure Shut On request Int. Safety Relief Valve | ||
| Options | Monitor Regulator, Silencer. | ||
Photo Gallery
