F Series Gas Regulator Pmax 25 bar
“F” series balancing membrane designed, diaphragm-controlled, spring-loaded regulators; Suitable for low and medium pressures. "F" series regulators are equipped with external sensing lines and can be designed as internal sensing according to customer request. A special regulator design combined with a balancing mechanism gives us;
About Product
“F” series balancing membrane designed, diaphragm-controlled, spring-loaded regulators; Suitable for low and medium pressures. "F" series regulators are equipped with external sensing lines and can be designed as internal sensing according to customer request. A special regulator design combined with a balancing mechanism gives us;
* High flow rate permeability
* High precision even at maximum flow
* 0 leakage even when there is no flow
* Accelerated reflexes
* Provides the results of maintenance and repair without disconnecting from the pipeline.
Direct drive Gas Pressure Regulators, Combined with Safety Shut Off Valve, are manufactured in accordance with 2014/68 / EU directives and EN 334: 2019 and EN 14382: 2019 standards.
Technical Specifications
| Design Pressure, PS | 25 bar | 2500 kPa | 362.5 PSIG |
| Inlet Pressure Range, bPu | 0.2 – 25 bar | 20 – 2500 kPa | 2.9 – 362.5 PSIG |
| Type | DS on request IS | ||
| Fail Mode | Fail to Open | ||
| BP Model | 10 - 85 mbar | 1 – 8.5 kPa | 0.14 – 1.23 PSIG |
| Outlet Pressure Range Wd MP Model | 80 - 350 mbar | 8 – 35 kPa | 1.16 – 5.07 PSIG |
| AP Model | 300 - 5000 mbar | 30 – 500 kPa | 4.35 – 72.5 PSIG |
| Operating Temperature | -20°C to +60°C / -4°F to 140 °F on req. -40°C / 40 °F | ||
| Ambient Temperature | -30°C to +60°C /-22°F to 140 °F | ||
| Accuracy& lock-up pressure(AC-SG) | up to AC5 / up to SG10 | ||
| BP Model AC5, SG20 – MP-AP Model AC5, SG10 | |||
| Lock-up Zone | Qmin, Pu / Qmax, Pu = 2,5 / 100 | ||
| Type of Fluid | Natural gas, Town gas, Propane, Butane, Air, Nitrogen or any non corrosive and filtered dry gases. Group1,2,3 | ||
| Diameter | DN25 - DN40 - DN50 PN 16/25 according to ISO 7005-1, ISO 7005-2; class ANSI 150RF according to ANSI B16.5, ASME B16.42 and class ANSI 125 FF according to ASME B16.1 - | ||
| Safety Devices | Over Pressure Shutoff and Under Pressure Shut | ||
| On request Int. Safety Relief Valve | |||
| Options | Monitor Regulator, Silencer | ||
Photo Gallery
